Inverter SN
Register1 SN
Inverter Type
Inverter DSP1
Manager ARM
Internal Code
A
b
o
u
t
Register2 SN
Register1 SN: it indicates the serial number of the
external monitoring devices,such as pocket WiFi,
pocket LAN and pocket GPRS.
Register2 SN: it indicates the serial number of built
-in Ethernet.
d-4-2) Relay Control
Relay Control is an optional function which can control designated load
intelligently by consuming the surplus energy when feed in power reaches
certain value.
This function can only be achieved with solax product “Smart Plug”.
For specific operation, please refer to “ Smart Plug user manual”.
>Relay1 Setting
>Relay2 Setting
Relay Control
d-4-3) New Password
User can set the new password here.
Ø
System Switch
●
”System Switch” can be selected from “ON” or “OFF”.
“ON” means the inverter is on working condition and it is inverter default
status.
“OFF” means the inverter stop delivering all power, but the LCD remains on.
>Switch
ON
System Switch
Ø
About
●
This interface shows information of the inverter including inverter serial
number, Register1 serial number, Register2 serial number, inverter type,
master DSP1,manager ARM and internal code.
Setting
Setting
60
61
Long press “Enter” key can also switch on ”System Switch” “ON” or “OFF”.
Switch on the device
ON
>
Do you want to
Inverter SN
Register1 SN
Register2 SN
About
Charger start time1
Charger end time1
The start time of the rst charger period.
Charger start time2
Charger end time2
The end time of the rst charger period.
The start time of the second charger period.
The end time of the second charger period.
Parameter
Comment
Summary of Contents for X3-Retro Fit
Page 36: ......
