Grounding the PV generator.
Comply with the local requirements for grounding the PV modules
and the PV generator. SolaX recommends connecting the generator
frame and other electrically conductive surfaces in a manner which
ensures continuous conduction and ground these in order to have
optimal protection of the system and persons.
NOTE
!
2.3 Explanation of Symbols
This section gives an explanation of all the symbols shown on the inverter and
on the type label.
Symbols on the Inverter
Symbol
Explanation
Operating Display
Communication is active.
An error has occurred, please inform your installer immediately.
Symbols on the Type Label
Symbol
Explanation
CE mark.
The inverter complies with the requirements of the applicable CE guildlines.
TUV certified.
RCM remark.
SAA certification.
Beware of hot surface.
The inverter can become hot during operation. Avoid contact
during operation.
Danger of high voltages.
Danger to life due to high voltages in the inverter!
Danger.
Risk of electric shock!
Observe enclosed documentation.
The inverter can not be disposed of together with the household waste.
Disposal information can be found in the enclosed documentation.
Don’t work on this inverter until it is isolated from both mains and on-site
PV generation suppliers.
Danger to life due to high voltage.
There is residual voltage in the inverter which needs 45 min to discharge.
• Wait 45 min before you open the upper lid or the DC lid.
Important Safety Instructions
When using the product, please do remember the below information to avoid
the fire, lightning or other personal injury:
Ensure input DC voltage ≤Max. DC voltage . Over voltage may cause
permanent damage to inverter or other losses, which will not be
included in warranty! This chapter contains important safety and
operating instructions. Read and keep this Operation Guide for
future reference.
WARNING
!
Authorized service personnel must disconnect both AC and DC
power from the ZDNY Series inverter before attempting any
maintenance or cleaning or working on any circuits connected to
the ZDNY Series inverter.
WARNING
!
• Read all instructions, cautionary markings on the inverter, and all appropriate
sections of this manual before using this inverter.
• Use only attachments recommended or sold by SolaX.
• Make sure that existing wiring is in good condition and that wire is not undersized.
Do not operate the ZDNY Series inverter with damaged or substandard wiring.
• Do not disassemble the ZDNY Series inverter. It contains no user-serviceable
parts. See Warranty for instructions on obtaining service. Attempting to service
the ZDNY Series inverter yourself may result in a risk of electric shock or fire
and will void your warranty.
• Keep away from flammable, explosive materials to avoid fire disaster.
• The installation place should be away from humid or corrosive substance.
07
06
2 Safety
2 Safety
