3
LOG SET INSTALLATION
Step #5
Install the logset burner within the firebox by lowering the burner into the firebox (while keeping the
burner pressed toward the right side of the firebox) then sliding the burner left towards the center of the
firebox to engage the burner orifice as shown in figure 08. Confirm that the burner inlet tube has
engaged the burner orifice.
Step #6
Secure the burner using the (4) #10 sheet metal screws set aside from steps 1 & 2.
Step #7
Install the 3-rock cluster on the 2 pins located just right of the pilot. (Figure 09)
FIGURE 08
FIGURE 09
