1
LOG SET INSTALLATION
Kit Contents:
•
(3) Ceramic Logs
•
(2) Ceramic Rocks
•
13oz Lava Rock
•
Metal Logset burner
Step #1
Your fireplace will have shipped from the factory with the Glass
Media burner in place, before installing the logset burner, we
need to remove the glass burner. The burner is held in place by 4
sheet metal screws behind the burner, 2 on the left and 2 on the
right as shown in figure 01. Figure 02 shows 2 screws on the left
behind the burner, remove these screws. Keep these screws in a
safe place as they will be needed to install the Logset burner.
Step #2
Figure 03 shows the 2 screws on the right behind the burner,
remove these screws. Keep these screws in a safe place as they
will be needed to install the Logset burner.
FIGURE 02
FIGURE 03
FIGURE 01
