17
CALIBRATION AND OPERATION
WARNING: BEFORE SERVICING THE POWERVENT CONTROL, DISCONNECTING OR RECONNECTING
ANY WIRE HARNESS, DISCONNECT POWER TO THE APPLIANCE.
WARNING: ALL INSTALLATION, SERVICING, AND TROUBLESHOOTING MUST BE PERFORMED BY A
QUALIFIED GAS TECHNICIAN.
NOTE:
ANY TIME POWER IS APPLIED TO THE POWER VENT CONTROL, THE CONTROL WILL BEGIN A 60
SECOND PURGE CYCLE, DURING THIS PURGE CYCLE THE CALIBRATION SEQUENCE CANNOT BE
INITIATED. DURING THE PURGE CYCLE, THE “
OPERATION STATUS LED
” WILL BE BLUE.
NOTE:
ANY TIME THE RESET BUTTON IS PRESSED ON THE POWER VENT CONTROL, THE CONTROL
WILL BEGIN A 60 SECOND PURGE CYCLE, DURING THIS PURGE CYCLE THE CALIBRATION SEQUENCE
CANNOT BE INITIATED. DURING THE PURGE CYCLE, THE “
OPERATION STATUS LED
” WILL BE BLUE.
NOTE:
In the event of a power loss during normal operation, the power vent and fireplace will shut
down. When power is restored the unit will be locked out. To relight the unit, press the off button on
the remote, listen for a single beep from the GV60 control. Once a single beep is heard, the fireplace
can be relit following the instructions on the lighting label of the appliance.
ON/OFF SWITCH
CALIBRATE BUTTON
RESET BUTTON
OPERATION STATUS LED
CALIBRATION STATUS LED
POWER LED
PRESSURE LED
SCPV-12218-XX
TERMINATION
HARNESS PLUG
LOCATION
Summary of Contents for SCPV-12218-100
Page 2: ......
Page 25: ...24 V1 5 5 20...
