solasfires.com
35
INSTALLATION
4. Once the (10) Philips screws are removed, lift the
screen up, then tilt the bottom out of the fireplace
to remove.
5. Remove the (3) ¼-20 bolts (see arrows) along the top
of the glass frame using a 7/16” socket.
(Fireplace enclosure front removed to show glass
frame hardware)
6. Once the (3) ¼-20 bolts have been removed, lift the
glass frame up, then tilt the bottom out of the fireplace
to remove using the same motion as was used with the
screen.
Reverse these steps to reinstall the glass and screen
assembly.
ATTENTION!
Once the unit is installed, test burn the fireplace for at
least 30 minutes to confirm that the unit is performing
as expected before enclosing the unit within the wall
while the vent pipe is still accessible. Failure to test
burn the fireplace may result in costly repairs not
covered by the manufacturer’s warranty.
