Congratulations on the purchase of your SOLARWATT Solar Module
These instructions describe the assembly,
connection, maintenance, and disposal of solar
modules. Please read them carefully and com-
ply with them accordingly.
The installation and electrical connection of
photovoltaic systems may only be carried out
by specialist personnel, who are familiar with
this work through their professional qualifica-
tions. For the operation, installation, use and
maintenance of the other components, comply
with the relevant installation instructions from
the manufacturer.
Incorrect installation can cause damage to pro-
perty, which could consequently pose a risk to
people. SOLARWATT accepts no responsibility
or liability for losses, damage, or costs resulting
from incorrect installation, operation, use, or
maintenance or losses, damage, or costs which
are connected to any of the above in any way.
The SOLARWATT installation instructions should
be made available to the operator as part of the
solar power system documentation and stored
by the operator.
Failure to comply with the installation instructions results in the warranty and guaran-
tee becoming null and void.
WARNING
Comply with the guidelines, laws, and regula-
tions valid in the relevant country when plan-
ning, setting up, and operating grid-connec-
ted PV systems. For information on additional
requirements, please contact the responsible
local authorities and the network operator.
Eco modules are manufactured according to
SOLARWATT specifications. The modules are
TÜV Süd-tested and fulfill the requirements of
the extended test standard IEC 61215, as well
as the safety standard IEC 61730. In addition,
the module deliveries are checked by our quali-
ty management according to a defined monito-
ring plan and additionally tested in our labora-
tory in Dresden for their quality and long-term
reliability.
If treated correctly, your SOLARWATT solar mo-
dules will offer you several decades of service.
SOLARWATT recommends insuring the PV sys-
tem against reduced yields or damage with
SOLARWATT Full Coverage for complete secu-
rity. Further information is available from your
SOLARWATT partner or online at www.solarwatt.
com.
Information on the solar module
Detailed electrical and mechanical properties
for your specific module type can be found on
the relevant data sheet. The key technical data
under standard test conditions [STC, solar cell
temperature: 25°C, irradiation: 1,000 Watt/m²,
air mass: 1.5 (corresponds to a sun elevation
angle of 41.8°)] can also be found on the name-
plate of the solar module.
SUBJECT TO CHANGE | © 2019 SOLARWATT GMBH | AZ-TM-PMS-1584 | REV 001 | STATUS: 01/2019 | PAGE 13
