SoLED W840 User Manual Version 4.1 051915
PRELIMILARY
13
DC MODE Override:
Lamp changes to 2400Hz flicker-free mode. This mode uses the intensity
channel of F4 mode to scale the intensity from 0 – 100%. Strobe Rate, Duration, and Effects are
bypassed. Fixture will remain at a constant intensity unless it senses a thermal limit being hit and will
throttle itself down in intensity back to operational specs. This mode will exhibit stepping, especially in
the lower range of the intensity channel due to the nature of the near pure-DC operation of the leds.
NOTE: If fixture senses over-limit thermal operation, smart-limiting activates and throttles the fixture
down to safe operating levels. The fixture allows full output bursts if the temperature is within operating
specifications.
M
ANUAL
M
ODE
Manual Mode allows control of SoLED without a controlling device. In this menu, manually select strobe
intensity, duration, and rate between strobe and other effects (see page 12). Manual Mode is a stand-alone
mode; values are saved if power is interrupted. “Reset” will clear Manual Mode values.
Manual function includes four settings:
Int
(intensity of strobe)
Dur
(duration of strobe)
Rate
(duration between flashes)
Eff
(special effect channel (see table on page 14)
1) Press and hold
<MENU>
button to open the Main Menu.
2) Use
<UP>
and
<DOWN>
buttons to find the Manual submenu and press the
<
>
button.
3) Manual Mode submenu will open.
Int
(Intensity)
Dur
(Duration)
Rate
Eff
(Effects, FX)
4) Manual Mode submenu will open.
Int
(Intensity)
Dur
(Duration)
Rate
Eff
(Effects(FX)
