SOLARIS® SMART 54W™
10
FIXTURE OPERATION
This section explains the fixture settings and utilities that the user has access to when us
-
ing the control panel. Settings are retained when the fixture is powered off.
The SOLARIS® SMART 54W™ can function in different modes:
DMX 3 CHANNEL MODE.
When operated in DMX 3 channel mode the fixture back
screen will show A001 when first accessed. By setting a value different from 001 you can
change the unit’s DMX address according to your lighting setup. Optional DMX address
values are 1 to 512. When you reach the desired value, press ENTER to save your changes.
DMX 2 CHANNEL MODE.
When operated in DMX 2 channel mode the fixture back
screen will show d001 when first accessed. By setting a value different from 001 you can
change the unit’s DMX address according to your lighting setup. Optional DMX address
values are 1 to 512. When you reach the desired value, press ENTER to save your changes.
STANDALONE MODE COLOR BLENDING
which allows you to manually change the pa
-
rameters of the fixture without using DMX data link. When operated in Standalone mode
the fixture back screen will show either: u000 (Cold White), C000 (Warm White) when
first accessed. By setting a value between 000-255, using the UP & DOWN buttons below
the screen, you can control the desired amount of every color (CW-WW). When you reach
the desired value, press ENTER to save your changes.
You can also manually
control strobe flashing
by changing the values when the back
screen shows F000 (Strobe Flash). By setting a value between 000-255, using the UP &
DOWN buttons below the screen, you can control the desired speed (strobe). When you
reach the desired value, press ENTER to save your changes.
Summary of Contents for smart 54w
Page 1: ...USER MANUAL...
