5
Lay Bucket inside of Base and screw on large nut.
Tighten with Philips screwdriver.
.
To improve the stability , please fill the bucket
with Sand.
Step 3 – Attach Cylinder Housing to Base
Attach Cylinder Housing Loosely to Base with 4 pcs
M5X8 bolts.
Step 4 – Attach Post to Cylinder Housing top
Open the door, put post through the hole on the top of
Cylinder Housing.
Attach post to Cylinder Housing using 4pcs M6X10 bolts
Cover the screws on the cylinder housing top with the
Decoration ring through the post.
ĭ[6PDOOIODWZDVKHUV
Step 5 – Attach Reflector Studs to Screen Cover
.
Insert 3 Reflector Studs & 3 Flat Washers.
.
Tighten studs securely.
3 Req’d Reflector Studs
3 Req’d Large Flat Washers
Fill Sand
