The cover is designed to be mounted on either left or right side of the
housing. Manufacturing setting is left-side mounting. To change to right-side
mounting, follow steps 1 - 5:
Step 1: Remove Hinge Pins
(Top & Bottom)
First remove the e-clips at the end of the pins. Then remove the pins
.
Step 2: Remove the
Removable
Hinges
(Top & Bottom)
First remove the screws. Then remove
the hinges.
Step 3: Remove the Door Seal Plug
Flex one of the legs to push the door plug out.
Step 4: Remove the Lock
First remove
the
screws. Then remove the
lock.
Step 5: Reverse step
s
1 - 4
and switch side when install the components back
on the cover. Note that the Hinges and Pins should be installed on the same
side that the cover is desired to be mounted on. The Lock should be installed
on the opposite side of the Hinges. And the Plug should be installed on the
same side as the Hinges.
See Figure
9
for more details.
Pin
Removable Hinge
E-clip
Top Hinge
E-clip
Removable Hinge
Pin
Lock
Screw
s
Door Seal Plug
Flex one of
the three legs
to push the
plug out
I
I
.
CHANGING MOUNTING SIDE OF COVER
Figure
9
.
Bottom Hinge
877
7
002
Released
February
22
201
9
7
