background image

    

○ 

○ 

○ 

Flooded

 

 

AC Inverter Operation Mode 

Power output 

This system continued output

150W, with a small surge capacity of 300w. Do 

NOT plug in heavy loads like microwaves, refrigerators, pumps, electric kettles, 

etc. This is meant to run laptop and device chargers, small LCD TVs 19" and 

below.  

 

How to use 

The system is  230V/60hz

with  continuous power of  150w. AC output is 

Modified sine wave. It cannot handle startup loads over 300W.  

Display and control system 

1. AC ON and green light is ON = AC output normal. 

2. While in use, the battery gets drained. When the DC  voltage drops to 10.2-

10.8V

there is a warning buzz.

 

At this point, the computers or other 

sensitive electrical appliances should be turned off.  

3. If you plug items over the rated 150W

AC output will automatically shut off, 

and the red light will go on.   

4. If it overheats due to poor ventilation or hot ambient temperature, AC output 

will automatically shut off and red light will go on. Alarm may buzz.  

5. It will automatically shut off if the battery voltage is low and lots of items are 

plugged in.  

 

  

Summary of Contents for MIG-HMP50

















Reviews: