2
The SOLARIC MIG-HMP50 solar power system consists of a 50W solar panel,
a solar charge controller, battery, mod sine inverter and comes with 2 LED light
bulbs, a multi-headed USB charger, and a DC fan. Solar power is converted into
electricity; under the regulation of solar controller, the converted electricity is
stored into the battery (this process is called charging). When using the device,
turn it on, and the battery will supply power for the load (this process is called
discharging). The main function of controller is to regulate the process of
charging and discharging. When the battery is too drained, the controller will cut
off the power automatically to protect the battery from over discharging; when
the battery is full, but the solar panel is still supplying power, it will start over
charging protection automatically.
After opening the packaging, please read the manual and operate accordingly. It
will prolong the service life of this system.
Attention
Please read the following messages before operating
1. The system is designed to supply power for family / home use.
2. Please put the case indoor in a dry place. It is not waterproof
3. Please put the case in a place where children cannot reach
4. Do not connect the system with other generators, such as wind driven generator
and diesel driven generator
5. Please cover the solar panels so it is not "live" before you connect the system
6. Be careful because a spark may occur when connecting
7. Put wires in a protective pipe if you want to lay them on the ground
8. Please check the batteries regularly; refresh startup environment; check its
polarity and connection to make sure the wires are not eroded or placed incorrectly.
9. Make sure the system is turned off before connecting wires.
10. Do not connect the solar panel with the incorrect polarity; put the wires in places
where it is not easy to reach after connection.