12 mySOLARFOCUS app
12 mySOLARFOCUS app
Function: The
mySOLARFOCUS app
allows you to
use your smartphone to access specific
eco
manager-
touch
control functions.
–
Set the room temperature and heating circuit flow
temperature, including heating times.
–
Hot water programs, with one-time DHW tank
charge.
–
Display the solar yield of your solar power system.
i
Installation and configuration of this function
must be performed by the customer (i.e. not
included in the commissioning, service and
support activities).
12.1 Requirements for use
–
The control must be connected to the internet.
–
Smartphone with Apple IOS 7.0 or higher or
Android OS 4.4 or higher
12.2 Connecting the control to the inter-
net
Create a network connection between the router
and the touch display
►
Use the
X2 Ethernet
(RJ45) on the rear of the dis-
play.
IP configuration
screen
►
To access the
IP-VNC
icon, select the following
in the control
–
Selection menu
screen
–
Customer menu
screen
–
Qualified personnel button
►
Enter the data for your router. Recommended
process:
–
Select
DHCP ON
.
Ä
The IP address is determined automatically.
–
Select the
DHCP OFF + Adopt
button.
–
The IP address must be unique in each Ethernet
network and is dependent on the other network
components (PC, modem/router, etc.).
–
Recommendation: Set a fixed IP address
(=
DHCP OFF
), i.e. the control has a constant IP
address.
12.3 Register on the web server
The touch display must be registered on the
SOLARFOCUS Web server:
►
Press the app button
Abb. 2-39
►
Continue by pressing
Accept
Abb. 2-40
►
Note the serial number and PIN
►
Switch the
Send data
parameter to
Yes
.
Abb. 2-41
If the connection is faulty, possible causes include:
28
Operation manual
vampair
