5 Use and operation
Abb. 2-20
Outgoing mail server
1
Enter the access data for the e-mail server you use.
Abb. 2-21
Use SSL
: Select if the e-mail server uses a TLS/SSL
encryption protocol.
Address book
2
A maximum of 10 contacts can be added. If there are
several addresses for a contact, these should be
comma-separated.
Write e-mail
3
Used to manually send emails. The recipient’s
address can be selected from the address book using
To
and
CC
or manually entered in the recipient line.
Alarm test
4
Used to test the email settings. Pressing the button
sends an email to the recipient
status email.
Send alarm email
5
Activates/deactivates the automatic sending of alarm
emails. The sending of status emails is not affected
by this.
Alarm configuration
6
Settings for the alarm emails to be sent automatically.
Abb. 2-22
Alarm subject
: is used for all alarm emails and status
emails, therefore it should be as meaningful as pos-
sible (e.g. system type / name of system operator; 40
characters available).
Alarm groups
: For prioritisation of the alarm mes-
sages (e.g.
Alarm group 1
receives all messages,
Alarm group 2
receives only operationally-relevant
messages, such as information on faults).
Status email
: Set the time at which the status email is
sent. The automatically generated content of the sta-
tus email is:
–
Current status of the heating system
–
Fault present, and which
Alarm selection
: This is where you define which alarm
group is notified of which event.
5.4.8.4 mySOLARFOCUS app
Pressing the button displays the screen with infor-
mation relating to online registration for the
mySOLARFOCUS app
(serial number, PIN, status,
etc.)
Detailed information about using the
mySOLARFOCUS app
5.4.8.5 Language selection
Abb. 2-23
Operation manual
vampair
17
