6 Installation
►
Mount the auger channel onto the burner with 4
pcs. hexagonal screws.
Fig. 2-19: Mount the auger channel
►
Tighten metal rings with 2 pcs. hex nuts onto the
threaded bolts; the (white) sealing ring is pressed
axially, creating a radial seal.
Fig. 2-20: Tighten sealing elements
►
Slide the ash extraction auger
1
into the auger
channel.
Fig. 2-21: Insert the auger
►
Dismantle cover
1
►
Fix auger shaft
2
into the receptacle
4
with hexa-
gonal screw
3
and hex nut.
Fig. 2-22: Connect the auger shaft
6.1.4 Connect flue gas recirculation line
►
On the back, connect the flue gas recirculation
line from the burner
1
to the ID fan
2
.
Fig. 2-23
18
Operation manual
maximus
