Configuring the SMI Using the LCD Light Button
Use the LCD light button for communication setup and for displaying the Error log and
Warning Log without having to open the SMI cover. There are fewer menus available
when using this configuration option; however, the functionality of these menus is the
same as when using the internal LCD user buttons.
1. Turn the SMI ON/OFF switch to OFF.
2. Press and hold down the LCD light button until the following message is displayed:
K e e p h o l d i n g b u t t o n
f o r p a i r i n g , r e l e a s e
t o e n t e r m e n u . . .
R e m a i n i n g : 3 s e c
Releasing the button displays the following menu:
O p t i m i z e r p a i r i n g
L a n g u a g e < e n g >
C o m m u n i c a t i o n
M a i n t e n a n c e
I n f o r m a t i o n
E x i t
3. Short-press (one second) to scroll down to the next menu option, and long-press
(three seconds) to select the item. You can use the Exit option in these menus to
move up one menu level or to exit the Setup mode from the main menu.
SMI-180 Installation Guide MAN-01-00157-1.1
33
SMI Configuration – Setup Mode