SolarEdge Smart Energy Relay, Installation Manual

Page: 13 / 23

Configuration
Smart Energy devices are configured using the following inverter types:
Inverters with an LCD - from firmware version 3.25xx.
Inverters with SetApp configuration - from firmware version 4.7.xx.
For detailed information about various use cases, refer to
https://www.solaredge.com/sites/default/files/home_energy_
management_immersion_heater_controller_use_cases_app_note.pdf .
NOTE
Verify that the inverter has a ZigBee Plug-in installed and is connected to the
monitoring platform (refer to the
Inverter Installation Guide for details on
setting up communication).
Configuration with Inverters with an LCD
Required inverter Firmware CPU version : v3.25xx and later.
To associate the device with the inverter using the inverter LCD user buttons:
1. Enter the inverter Setup mode as described in the Inverter Installation Guide.
2. Select Communication
è
ZigBee Conf. .
3. Select:
Device Type
è
HA (Home Automation)
Protocol
è
HAM (Home Automation)
When HA Device Type is selected, a Device Manager menu item will appear in the
main configuration menu:
C o u n t r y < I t a l y >
L a n g u a g e < E n g >
C o m m u n i c a t i o n
P o w e r C o n t r o l
D i s p l a y
M a i n t e n a n c e
I n f o r m a t i o n
4. From the main menu select Device Manager . The Device Manager screen is
displayed:
A d d D e v i c e s < 0 >
Smart Energy Relay Installation Guide
12 Configuration