Commissioning the Installation
SolarEdge Installation Guide for Three Phase Inverters
– EU – Version 1.5
45
Inverter Serial Number(s) at the Site:
Each inverter’s serial number
is printed
on a sticker on the side of the inverter, on the inverter
warranty card and on the inverter box. Each inverter’s sticker has a
detachable tab on which the inverter’s serial number is printed. You
can remove this tab and stick it on a piece of paper. The power
optimizers also have a sticker with a detachable tab on which the power
optimizer’s serial number is printed.
An easy way to report all the inverters’ and power optimizers’ serial
numbers to SolarEdge is to collect all the inverters’ and power
optimizers’ stickers, stick them on the same piece of paper and then fax
this paper to SolarEdge.
If you wish, you can also supply the following information.
Logical Mapping:
Showing which power optimizer is located in which
string and in which order. You can specify the logical mapping of the
strings and power optimizers, as follows:
P.Inverter_number.String_number.power optimizer_number
.
For example, the third power optimizer connected to a power optimizer
in the second string in the #4 inverter in the installation is represented
as
P.4.2.3
.
Physical Mapping:
Showing a physical map (a drawing) of the
location of each power optimizer in the installation. Providing this is
easiest using the
SolarEdge Physical Layout Template
available on the
SolarEdge website.
The logical and physical mapping can be used in the future for debugging a
problem using the SolarEdge Monitoring Portal.
