|
35
December 2020
|
Solar Stik
®
, Inc.
Operator and Maintenance Manual for the PRO-Verter S 3000
PRELIMINARY
How to Connect two (2) MPGs in parallel to the PRO-Verter
The PRO-Verter S 3000 has the ability to receive power from two (2) MPGs simultaneously. The
power output from each of two generators is merged into a single “Y” cable connected to a single
power input port on the left side of the PRO-Verter (Figure 12). The mode of each generator is
controlled independently and each has its own communication cable to the PRO-Verter. The LED
over each Generator Control Switch (PRO-Verter Faceplate) blinks slowly when functioning in Auto
mode, more rapidly when manual On mode, and very rapidly when there is a generator fault. The
LED does not blink when the switch is in the Off position.
To PRO-Verter
AC input port
Figure 16. Connecting two 1 kW generators in
parallel with the “Y” AC power cable.
Novatio AC
Power “Y”
Cable