Solar Stik Li Expander Pak 2400 Quick Start Manual Download Page 8

Solar Stik

® 

Technical Bulletin 2

Effective Date 20150831

800.793.4364

[email protected]

www.solarstik.com

© 2019 Solar Stik Inc. 

All Rights Reserved. Solar Stik is a registered trademark of Solar Stik Inc.

SS20190717

Item #

Item to be

Inspected

Interval 

at

91-140 

ºF 

(33-60 

ºC)

Storage 

Temp

Interval at

77-90 ºF

(< 25-32 ºC)

Storage 

Temp

Procedures

Non-mission 

Capable

4

In-storage 

maintenance 

charging

Q

S

3

1.  Charge Li Expander Paks 

for 24 hours at 29.0 V. 

Follow the instructions for 

the lithium battery charger 

used. 

2.  Charge until the Battery 

Status LED on all Li 

Expander Paks is flashing 

green (if flashing red to 

begin with). 

3.  If the Battery Status LED 

flashes red on any Li 

Expander Pak after 24 

hours, continue charging 

all Li Expander Paks for 

another 24 hours.

~If any Li Expander 

Pak has a red-flash 

Battery Status LED 

after 48 hours of 

charging OR if the 

LED emits no light 

after charging, 

contact Solar Stik 

Technical Support.

Continued from previous page

Page 8 of 8

Summary of Contents for Li Expander Pak 2400









Reviews: