| 3
October 2018 | Solar Stik®, Inc.
Instruction Manual for Reprogramming the DSE 3110
5. The “USB Connected” symbol will appear on the DSE3110 screen
when it is connected to the laptop.
6. Open the DSE Configuration Suite
software on the laptop. Click “Open
a configuration file” (arrow).
Note:
If the software presents a
prompt to upgrade the firmware on
the DSE 3110, do so.
7. Navigate to the 19-0401001_
programming_[YYMMDD].dse
file (supplied by Solar Stik). Click
to open this file. (
Note:
The file
name shown here is only as an
example. File names will vary.)
