Solar Royal SR1800 Series Installation Manual
Solar Royal, LLC | 2018 (Rev6)
Page 6 of 8
Removing obstructions *Flashing after being slide in
*If possible and to make it look cleaner, replacing the shingles on the bottom third of the
flashing. This is not a requirement, just optional.
2.3.3
Sealing and Securing the Flashing
Once the metal flashing is in place, gently lift the lower exposed metal base flashing and
apply sealant (caulk) generously under the side and lower edges but not so much that it
oozes out. If sealant starts to ooze, just wipe off excess before it hardens. The bottom part
of the flashing will be exposed and sit on top of the shingles.
