When three Alpha H2 heaters are joined they should only be hung from a ceiling on
chains - do not wall mount!
Always allow the heater to cool before attempting to reposition/move. Never attempt to
move the heater while it is switched on!
Observe the minimum safe distance between the heater body and inflammable surfaces
and objects when mounting.
Please refer to Table 1 for the recommended positioning of the heater with regards to
minimum distances. Do not install the heater in a corner!
Keep out of the reach of children.
C H A I N H A N G I N G -
3 × D O U B L E ( T W O E M I T T E R S ) H E AT E R S J O I N E D
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
Switch off/unplug the heater from the mains supply when mounting or adjusting the
heater position.
Fig. F
1. Please refer to Table 1 for recommended positioning of the heater. When hanging from
a ceiling four chains of equal length and gauge are required and should be selected
with fixings that are adequate to hold the weight of the heater. If in doubt contact a
professional for advice!
2.
Fix the heater assembly to the chains via the hole in the centre of the joining bars as
shown in Fig. F. and ensure the heaters face directly down when hanging.
3. Secure the supply cable so it is not resting on the body or obstructing the air-vents.
Always isolate the heater from the mains supply when adjusting the position.
S
E
E
T
A
B
L
E
1
F
O
R
M
IN
IM
U
M
D
IM
E
N
S
IO
N
S
10
