HEAT PUMP AND TANK ASSEMBLY
27
14.
Electrical Cover:
Replace the electrical cover, engaging the bottom of the cover into the slots on the
supporting bracket.
Secure at the side with the mounting screw.
15.
Water Connections:
Connect the cold water supply and the hot water pipe work to the water heater.
Connect the temperature pressure relief valve and its drain line.
Refer to
“Connections – Plumbing”
on page 28
16.
Water Supply:
Turn on the cold water supply and fill the water heater.
Check the pipe work and the inlet and outlet connection points of the flexible hoses for leaks.
Refer to
“To Fill And Turn On The Water Heater”
on page 35, however the electrical supply should
not be switched on at this stage.
17.
Air Louvre Attachment:
Replace the two air louvres, ensuring the longer skirt of the louvre is orientated
to the bottom and re-fit all twelve (12) louvre attachment screws.
18.
Electrical Connection:
Refer to
“Connections – Electrical”
on page 30.
19.
Commissioning:
Refer to
“Commissioning”
on page 35.