45
44
•If it does not turn on:
- Make sure that the power supply is plu-
gged properly into the device and the
electrical outlet.
- Make sure the power outlet has power.
• If it does not trigger a pulse:
- verify there is full contact with the skin.
The trigger button will activate a flash
pulse only when the device is in full
contact with the skin.
- verify that the area you are trying to
treat is not too small, curved or bony to
treat. you should get the whole treat-
ment window in touch with the treat-
ment area (try to pull the skin flat).
- If the skin color level identified by the
device is too dark, the flash activation
will be blocked.
- In the case of a safety issue or when
the lamp has reached it send, a steady
red light will come on. the device will
shut down.
general errOr:
• In case of dirt or debris is stuck on the
treatment window, you should clean the
treatment window according to the cle-
aning section. If you can’t get the area
clean, contact our customer service.
• In case of a delay in pulse readiness,
you should consider working in cooler
environment. the device may pulse at a
slower rate in warm environment.
• In case of a general error, reset the de-
vice – unplug the power cord from the
electrical outlet on the wall, wait 10 se-
conds and then reconnect it.
• If you still have problems with your devi-
ce, please contact customer service.
anOMalIes anD rePaIr
• choose the adequate sentence/s depen-
ding of appliance
• take the appliance to an authorised te-
chnical support service if product is da-
maged or other problems arise. Do not
attempt to disassemble or repair the
appliance yourself as this may be dan-
gerous.
• In case of breakdown call the customer
service telephone number indicated in
the guarantee sheet. Do not attempt
to disassemble or repair the appliance
yourself as this may be dangerous.
• If any anomaly is detected, check the fo-
llowing table:
anomalies
causes solutions
• This appliance has been filled with a
quantity and quality of certain oils, the-
refore the replacement or refilling of oil
in case of a leakage should be carried
dEvIcE SPEcIfIcATION
PARAMETERS
emitted light spectrum:
475 [nm]to 1,200 [nm]max.
Emitted energy flux: 5 [J/cm²]
selectable energy levels: 3 levels
Treatment area (window): 3 [cm²]
speed: 1 pulse every 3seconds
external Power supply: 12[v], 1.8[a]
100–240 [vac], 50–60[hz]
Deviceweight and size:
- 220 [gr], 135 X 45 X 75 [mm]
- 7.8 [Oz], 5.3 X 1.77 X 2.96 [in]
technology: home use IPl
STORAGE INSTRucTIONS
stOrage anD transPOrt
cOnDItIOns
temperature: -10ºc to 70ºc (14ºf to
158ºf)
humidity: 0 to 90% rh at 55ºc (131ºf)
Pressure: non-condensing
OPeratIOnal cOnDItIOns
temperature: 10ºc to 40ºc (50ºfto104ºf)
humidity: 30%to70%rh
Max operating altitude: 10,000 ft.
· continuous operation with short-time
loading
· Not suitable for use in presence of flam-
mable anaesthetic mixture with air or
with Oxygen or nitrous oxide
NB: These specifications are subject to
change without notice of purpose of im-
provement.
nB: By virtue of the conditions of fabri-
cation of this product, the maximum ab-
sorbed power can differ from that speci-
fied.
nB: By virtue of the conditions of fabrica-
tion of this product, the maximum used
power can differ from that specified.
for Eu product versions and/or in case
that it is requested in your country:
ecOlOgy anD recyclaBIlIty Of
the PrODuct
· the materials of which the packaging of
this appliance consists are included in
a collection, classification and recycling
system. should you wish to dispose of
them, use the appropriate public recy-
cling bins for each type of material.
· the product does not contain concentra-
tions of substances that could be consi-
dered harmful to the environment.
manual_epilsense_pliegos_0309.indd 44-45
03/09/15 13:29
