39
38
5. Press the trigger button (see image – item
2) and hold it pressed for continuous pul-
sing.
6. Press the trigger button once for single
pulse.
7. while pressing the trigger button, you
will see a bright flash, you will hear a
popping noise and you may feel a mild
stinging and/or heat sensation.
8. Keep the trigger button pressed and
start moving the device with each pul-
se to the next spot without detaching it
from the skin. the device will immedia-
tely recharge and will be ready for the
next pulse. repeat process until the en-
tire treatment area has been covered.
9. after the treatment, turn off the device
by pressing the “On/Off” button for 3
seconds; asteadyorange indicator will
light up, while the device is in the shut-
down mode. unplug the unit after each
treatment session.
IMPOrtant nOtes:
• try not to overlap pulses on the same
spot. repeated pulses on the same spot
may cause burns.
• Do not treat the same area of skin more
than once per treatment as it may cause
skin irritation.
• the device will not trigger a pulse if:
a. there is no full contact of the treat-
ment window with the body skin.
b. your skin tone is too dark or tanned.
tyPIcal treatMent Interval:
while treating with epil Mini™, do not
overlap pulses on the same spot of skin.
• Body hair: the first 1–4 hair removal treat-
ments will be approximately two weeks
apart.
the next 5-8 hair removal treatments will
be four weeks apart.
• Facial hair: the first 1–5hair removal
treatments will be approximately two
weeks apart.
the next 6-8hair removal treatments will
be four weeks apart.
• treatment 8+ hair removal treatments
will be as needed, until desired results
are achieved.
energy levels:
recommended energy levels are depen-
dent on both your hair color and skin tone
in the treated area. for your convenience
– below is a table of recommended energy
levels per each option.
Important: facial treatment should be per-
formedat 1-2 energy levels only.
REcOMMENdEd TREATMENT PROTOcOl
manual_epilsense_pliegos_0309.indd 38-39
03/09/15 13:29
