57
EN
9. Maintenance, storage and transportation
9.1 Cleaning
> Wipe off the dirt with a soft damp cloth.
> Check the outlet openings of the laser regularly, and thoroughly clean them if necessary.
Do not touch the glass with your fingers.
> Do not use aggressive cleaning agents or solvents.
> Do not immerse the device into water!
> Clean and dry wet equipment, accessories and transport containers prior to packaging
them. Only pack equipment again when it is completely dry.
> Keep plug connections clean and protected from moisture.
9.2 Storage
9.2.1 General
> The equipment may only be stored within the specified temperature limits
(see Chapter 3 / Technical data).
> After a prolonged storage check the accuracy of the measuring device before using it.
9.2.2 Batteries / rechargeable batteries
> For storage, remove the batteries from the device or from the charging station.
> The storage should preferably be performed in a dry environment at room temperature
(see Chapter 3 / Technical data).
> Protect from moisture and humidity. Dry wet or damp batteries before the storage, or
respectively before usage.
> Prior to a prolonged storage charge the battery to 80% capacity (see Chapter 7 /
operation). Repeat the procedure every 6 months.
> After storage, fully charge the battery before use.
> Check the battery for damage before use. Do not use damaged batteries!
NOTE:
If the marked point 3 is to the right of point 2 , the
sum
of the horizontal
distances d1 and d2 may only be a max. of 3 mm at a measuring distance of 5 m.
NOTE:
If the marked point 3 is to the left of point 2 , the
difference
of the horizontal
distances d1 and d2 may only be a max. of 3 mm at a measuring distance of 5 m.
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com