EN
24
9. Maintenance, storage and transportation
9.1 Cleaning
Wipe off any dirt with a soft damp cloth.
Check the outlet openings of the laser regularly, and thoroughly clean them if necessary. Do not touch
the glass with your fingers.
Do not use aggressive cleaning agents or solvents.
Do not immerse the device into water!
Clean and dry wet equipment, accessories and transport containers prior to packaging them. Only
pack equipment again when it is completely dry.
Keep plug connections clean and protected from moisture.
9.2 Storage
9.2.1 General
The equipment may only be stored within the specified temperature limits
(see Chapter 3 / Technical data)
.
After a prolonged storage, check the accuracy of the measuring device before using it.
9.2.2 Batteries / rechargeable batteries
For storage, remove the batteries from the device or from the charging station.
The storage should preferably be performed in a dry environment at room temperature
(see Chapter 3 / Technical data)
.
Protect from moisture and humidity. Dry wet or damp batteries before storage or before use.
Prior to a prolonged storage, charge the battery to 80 % capacity
(see Chapter 7 / operation)
. Repeat the
procedure every 6 months.
After storage, fully charge the battery before use.
Check the battery for damage before use. Do not use damaged batteries!
9.3 Transport
9.3.1 General
The device may be damaged by strong vibrations or by dropping.
Never transport the product loose. Always use the original packaging or an equivalent transport container.
Switch off the measuring device before transporting it. During the shutdown the pendulum unit is
locked in position and protected against damage.
Check the unit for damage before use.
Regularly check the accuracy of the device
(see Chapter 8 / Checking the accuracy)
.
