Sola AURA-3215, Starting Manual

Page: 18 / 24

18
TIPS FOR USE
6- TIPS FOR USE
6.1 AURA-3215 WITHOUT ISOBUS
1- Forward speed:
To obtain a uniform work, keep the forward speed without sudden
stops, since variations in forward speed modify the amount of pro-
duct applied on the ground.
To put attention when starting and stopping the tractor:
- When STARTING , the air circuit is empty and the machine
will not work until it has run some metres.
- When
STOPPING
, It is recommended to cut the dosing a
few meters before stop.
2- Check product’s flow:
Perform a previous calibration test in the warehouse in order to
know exactly the amount of product going to be spread. Dosage is
going to be very different when using different kinds of product, as it
depends on factors such as density, moisture content, etc..
3- Distance between tramlines:
Keeping the distance between tramlines is essential to get opti-
mal distribution.
6.2 AURA-3215 CON ISOBUS
1- Advancing speed:
Activate mode <PRESTART> . In this mode, dosage errors during
start-up and shut-down of the tractor will be minimized. For that see
specific manual for the MULTIPERFORMER ISOBUS.