manualshive.com logo in svg

Sola A-6000 SM, Manual

The Sola A-6000 SM is a powerful and versatile device designed to meet all your needs. With a comprehensive user manual available for free download on our website, you can easily unlock the full potential of this product. Discover its features and functionalities today at manualshive.com.

Share
Download
background image

- 4 -

- 4 -

7. DISTRIBUTION TYPE ................................................................................................................................................. 42

7.1 WITH MECHANICAL DRIVE TURBINE ...................................................................................................................................... 42

7.2 WITH HYDRAULIC DRIVE TURBINE ......................................................................................................................................... 43

8. SOWING ELECTRONIC CONTROL .............................................................................................................................. 44

8.1 CONTROL PANEL, DESCRIPTION .............................................................................................................................................44

8.2 RUNNING SPEED -C1 ................................................................................................................................................................. 45
8.3 TOTAL AREA / SEED DRILLER WIDTH - C2 ............................................................................................................................. 45

8.4 CONTROL PANEL WITH TRACK MARKER (OPTIONAL) ........................................................................................................46
8.5 ROAD TRACKING - C3 ................................................................................................................................................................46
8.6 TURBINE ROTATIONAL SPEED/ TURBINE ALARM - C4 ........................................................................................................ 50

8.7 DISTRIBUTOR SHAFT - C5 ......................................................................................................................................................... 50
8.8 HOPPER LEVEL ALARM - C6 ..................................................................................................................................................... 51 

8.9 TOTAL SEEDING CUT OFF (OPTIONAL) .................................................................................................................................. 51
8.10 EXIT CLOSING AT FOLDING PARTS (OPTIONAL) ................................................................................................................ 52

9. MAINTENANCE ......................................................................................................................................................... 53

9.1 SERVICE FREQUENCY ................................................................................................................................................................ 54

9.2 SEED DRILLER CLEANING ......................................................................................................................................................... 55
9.3 TYRE PRESSURE ......................................................................................................................................................................... 55
9.4 LUBRICATION AND GREASING ................................................................................................................................................ 56

10. DOSAGE CHART ...................................................................................................................................................... 57

10.1 SEED CHART .............................................................................................................................................................................. 57
10.2 ROLLER DISPENSER CALIBRATION FACTOR TABLE .......................................................................................................... 59
10.3 TABLES FOR CONVENTIONAL OR MICROGRANULATE FERTILIZER KITS ......................................................................60

10.3.1 INTERNAL KIT HOPPER WITH MECHANICAL TRANSMISSION  .......................................................................60
10.3.2 INTERNAL KIT HOPPER WITH ISOBUS .................................................................................................................60

Summary of Contents for A-6000 SM

































































Reviews:

No comments

Related manuals for A-6000 SM

Sola A-6000/NS PLUS Manual preview
A-6000/NS PLUS
Brand: Sola Pages: 44
Nexus Cardas Audio Instruction preview
Cardas Audio
Brand: Nexus Pages: 52

Brands by name

Popular brands

Load more brands