- 16 -
- 16 -
5.4 TRANSPORTATION POSITION
With the machine coupled with the tractor and the hydraulic
circuits connected to the tractor distributor, follow the steps
below for transporting the machine:
Fig. 5.9
1-
Fold the track markers.
2-
Fix the COMPACTING ROLLERS; in order to do so, place the
bolts (A, Fig. 5.10)
3-
Lift the lateral equipment and make sure that the security
locks are locked (Fig. 5.11).
Fig. 5.11
Fig. 5.11
Fig. 5.10
Fig. 5.10
A
4-
If the track eraser is down, make sure that its stopcock is
open.
5-
Lift the seed drill and track eraser up to their maximum
position.
AVOID THE MOVEMENT OF THE MOVABLE ELE-
MENTS.
AFTER FOLDING THE MACHINE, AND BEFO-
RE TRANSPORTING IT, MAKE SURE THAT THE
TRACK ERASER HAS BEEN LIFTED; OTHERWISE,
VERIFY THAT THE STOPCOCK IS OPENED AND
REPEAT THE PREVIOUS STEPS IN THIS SECTION.
ACCORDING WITH THE WORKING CONDITIONS
DEFINED BY THE FINAL USER AND THE OPTIONS
INCORPORATED, THE MACHINES COULD NOT
MEET THE REQUIREMENTS STABLISHED BY THE
LAW TO TRANSPORT THEM ON PUBLIC ROADS.
THE COMPLIANCE OF THE LAW IS STRICTLY
RESPONSIBILITY OF THE FINAL USER OF THE
MACHINE. MAQUINARIA AGRÍCOLA SOLÁ S.L.
DENIES ANY RESPONSIBILITY DERIVED OF
NON-COMPLIANCE OF THE REGULATIONS ON
THE COUNTRIES WHERE THEIR PRODUCTS ARE
DESTINED TO.
IMPORTANT:
THE OFFICIALLY APPROVED
HOOKS FOR TRAVELLING ON PUBLIC HI-
GHWAYS ARE THE RING HOOKS. THE OTHER
HOOKS ARE PROVIDED SOLELY FOR OFFROAD
USE ON FARMLAND. USE OF THESE HOOKS IS
STRICTLY AT THE USER’S SOLE LIABILITY.
The braking system has a valve located at the front of the
machine. This valve is regulated by a lever (Fig. 5.12), that
should be placed in the right posiltion according to the level
of filling of the hopper.
Position 1/1
- with the hopper full of product.
Position 1/2
- with the hopper at half capacity.
Position 1/4
- with the hopper empty or with very little product.
Fig. 5.12
Fig. 5.12
WARNING:
THE INCORRECT USE OF THIS DE-
VICE CAN BE DANGEROUS AND GENERATE AN
UNSUITABLE BRAKING OF THE VEHICLE. WITH
THE CONSEQUENT RISKS THAT THIS ENTAILS.