background image

3

!

CAUTION

BATTERY HANDLING PRECAUTIONS
Servicing of batteries should be performed or supervised by 

personnel knowledgeable of batteries and required 

precautions. Keep unauthorized personnel away from the 

batteries. 
A battery can present a risk of electrical shock and high 

short-circuit current. The following precautions should be 

observed when working on batteries: 
• Remove watches, rings, and other metal objects. 
• Use tools with insulated handles. 
• Do not dispose battery or batteries in a fire. The battery 

may explode. 

• Do not open or mutilate the battery or batteries. Released 

electrolyte is harmful to skin and eyes. It may be toxic.

• When replacing the battery, use same number and type of 

battery as the suitable recommended type of battery listed 

in specification table in back of this manual.

• Handle, transport and recycle batteries in accordance with 

local regulations.

!

WARNING

If your UPS demonstrates any of the following conditions, 

turn off and unplug your UPS from the outlet and contact 

your local distributor, Sola/Hevi-Duty representative, or 

Sola/Hevi-Duty Technical Services.
• The power cord is damaged.
• Liquid has been spilled on the UPS.
• The circuit breaker or fuse opens frequently.
• The UPS does not operate in accordance with the user 

manual.

Summary of Contents for S2K

































Reviews: