16
| 5.0 installation
4.
Adjust the direction of the operation and display panel on the UPS.
a.
remove the front metal bezel cover as shown in Figure 7.
Front Metal
Bezel Cover
Figure 7: Remove the front metal bezel cover
b.
Using the finger grips on the display panel, gently pull and rotate 90 degrees clockwise and snap it back into
position as shown in Figure 8.
Figure 8: Rotate the operation and display panel
c.
replace the front metal bezel cover on the UPS.
5.
Place the UPS and any battery cabinets on the support bases. Each UPS requires two support assemblies as shown in
Figure 2.
