S4KC SEriES USEr MAnUAL |
35
10.0 Maintenance
This section describes replacing the internal battery pack, precautions, checking the UPS status, and checking UPS functions.
10.1 Replacing the Internal Battery Pack
The UPS is designed to allow the user to safely replace the internal battery pack. read the safety cautions before
proceeding. Contact your local dealer or SolaHD representative to obtain the part number and pricing of the appropriate
replacement battery pack.
10.1.1 Battery Replacement Procedures
1.
Gently remove the front metal bezel cover from the UPS.
2.
Loosen and remove the six screws on the battery door, as shown in Figure 25.
3.
Lay the battery door and screws aside for reassembly.
Front Metal
Bezel
Battery Door
Screws, 6
Figure 25: Removing the front metal bezel cover and battery door
4.
Gently pull the battery wires out and disconnect the battery connectors and receptacles, as shown in Figure 26.
Battery Connector
Battery Receptacle
Battery Connector
Battery
Receptacle
Figure 26: Disconnecting the battery plug and battery receptacle (front view)
