Stick on the solar cell.
What you will need:
3
C
Adhesive
pad
1 x
1 x
2 x
1
1
1
4
Solar cell support
Apply some glue to the solar cell...
1
3
Feed the motor cable through the solar cell support
and connect it to the solar cell. Press the button,
push in the cable, release the button - job done.
Red cable to "-", black cable to "+".
1
2
Adhesive pad
Adhesive pad
of the solar panel.
...then glue into the wave panel and
stick the adhesive pads on the back
