3
B
Screw the dolphin wheel (position it as shown in the picture) to the gearbox axle A with the M3 x 5 mm screw using the screwdriver.
Secure it in place with the wood spanner to prevent it from turning. Then apply a thin layer of glue on the wave plate (where
it is red in picture 2) and then glue it in the middle of the base plate. The 3 slots in the base plate must point forwards as in picture 3.
What you will need:
M3 X 5 mm
1 x
2 x
1 x
1 x
ü
M3 X 5 mm
1
1
1
1
2
3
Correct direction of rotation
Wrong direction of rotation
0.5 cm
A
3 slots visible
1 x
