Sol-Expert 79334, Manual

Page: 6 / 28

INSTRUCTIONS
Laser cut wood bending tool
To ensure the resistors and diodes fit in the middle
between the eyelets, the connection wires on the parts
must be bent at just the right position.
D3 = red diode), then bend the wires down straight along the
wooden edge. The part will now fit perfectly between the eyelets.
It's much easier to bend all resistors and the diode now to have
them ready for the next steps.
To help we this we designed a simple yet functional bending tool .
Simply place the parts in the respective opening (R = resistor / D1 /
D2 = black diode /
1
Bent
Resistor before
bending
Now bend the resistors and diodes as shown
in the following steps:
Insert resistor Bend one leg down