100 kOhm 100 kOhm
trim leads with side cutter
with side cutters
Transistor
Diode
C
A
Fit and solder 5 resistors,
Fit and solder transistor BC337 (note
D
E
Soldering the solar cell
1
The small SMD component (SI2301) is already soldered on!
Fit and solder diode 1N4148 (note
B
Soldering the board
2
Environmental Warnings
Assembly Instructions:
1N4148
BC337
20 kOhm
100 kOhm
8,2 Ohm
Solder cable (red and black 15 cm)
Red cable to "+", black cable to "-"
3
1
2
Tin-plate contacts
(apply solder)
polarity!), trim leads with side cutters
correct installation position), trim leads
Resistor
100 kOhm
3x
brown
brown
black
black
orange
20 kOhm
red
brown
black
black
red
8,2 Ohm
grey
brown
red
black
silver
Soldering point
1x
1x
General:
Please return the board to a certified disposal company at the end of its useful life. They will ensure the
board is disposed of in accordance with the law. This is environmentally friendly and actively contributes to the
protection of the environment.
Battery ordinance:
Dear customer, you have purchased a battery-operated product from us. Although the storage
battery has a very long life, it will eventually need to be disposed of. Used batteries must not be discarded in the
household waste. Consumers are legally obligated to return batteries to a suitable collection site. Used batteries
contain valuable raw materials which are recyclable. You may also send your batteries to: SOL-EXPERT group,
Mehlisstrasse 19, 88225 Baindt.
ATTENTION:
The end user of this
product is required
by law to recycle the
storage battery in
this product!
