Subject to change and corrections
©
April 2017 / Christian Repky
When you slide the switch, the LED should light up.
Use the sandpaper to remove
any fibre from the edges of the tube
Solder the switch leads
and solar cell.
Note the lead colour!
Slide the board into the tube
Solder the LED leads.
Insert battery
Note the lead colours and polarity!
Twist and slide on the LED cover
Finished!
Twist and slide on the switch cover
Feed the solar cell leads through
the hole and insert the solar
cell into the recess
Red
switch lead
Red
LED lead
Blue
switch lead
Black LED lead
Black solar cell lead
Red
solar cell lead
LED+
SW1
SOLAR -
SOLAR +
SW2
LED-
If the LED does not light up:
Check the components on the board
Check the soldering
Check the battery polarity
Charge the storage battery in the sun for a few hours
Note the polarity!
5
Soldering and final assembly
P
R
X
U
Q
W
T
TEST:
V
S
