Troubleshooting
SHC2500 Operator’s Manual
5-2
• Make sure the serial communications configuration is correct.
• Make sure the correct COM port is available.
• In ActiveSync, make sure you are using the correct connection
settings for the connection type you are using, such as USB,
serial, or Ethernet.
The screen is too light or too dark
Adjust the lighting by using the Control Panel to adjust the
brightness.
Tap
Start
Settings
Control Panel
Backlight
. The
Backlight
Contro
l dialog box displays. Use the backlight control slider to
increase or decrease the lighting on the main screen display.
The stylus is not responding properly
The screen is not calibrated
correctly to interpret the screen taps.
Recalibrate the screen.
Tap
Start
Settings
Control Panel
Stylus
. The
Stylus
Properties
dialog box displays. On the
Calibration
tab, press the
Recalibrate
button to recalibrate the screen.
The SHC2500 responds slowly
The device may be short of program memory or storage memory. To
increase memory, tap
Start
Settings
Control Panel
System
.
The
System Properties
dialog box displays. On the
Memory
tab, do
the following:
• Increase the amount of storage or program memory by
adjusting the memory slider
• You can also delete any unnecessary files
I get little or no sound from the SHC2500
Use the Volume and Sound control in the Control Panel to adjust the
volume and sound properties.
No sound is heard when I tap the touch screen or press a key
• Make sure the volume setting is high and turned on.
Summary of Contents for SHC2500
