Sokkia SHC2500, Operator'S Manual

Page: 24 / 82

Operating the SHC2500
SHC2500 Operator’s Manual
2-2
Front Panel Components
For information on front panel components, see “Front Panel
Components/Indicators for the FC-2500” on page 1-4 for further
details.
On/Off Button Operations
The On/Off button is located at the bottom-left of the front
panel and functions depending upon the state of the hand-held
computer when the button is pressed and considering the length of
time it is pressed. The following is a list of
On/Off
button operations:
• Cold Boot
• Suspend
Performing a Cold Boot for the
SHC2500
To cold boot the SHC2500, press and hold the
On/Off
button for
about 10 seconds. This action also terminates running applications
and stops serial port operations.
Placing the SHC2500 in Suspend
Mode
To place the SHC2500 in Suspend mode, press and release the
On/
Off
button. Suspend mode allows you to suspend, but not terminate
active applications. In this mode, the display turns off and the
SHC2500 stops serial port operations. For battery-powered units,
Suspend mode also conserves battery power.
To take the SHC2500 out of Suspend mode, press and release the
On/
Off
button again. The display turns on and the device begins running
any suspended application, but you must restart any serial port
operations. If you attempt to use the SHC2500 before it has
completely resumed operations or use it while it is entering Suspend