Sokkia SHC2500, Operator'S Manual

Page: 35 / 82

Power Management
P/N 7010-0950
2-13
Figure 2-8. Capture Folder Dialog Box
By default, the Screen Capture program automatically assigns a
number to each screen capture. The numbering scheme starts at
JET00000 and increases by one after each capture.
5. To reset the picture numbering scheme to JET00000, press and
enable
Reset Counter
on the
ScreenCapture
dialog box.
Warm Boot
Occasionally, a program may encounter an error from
which it cannot recover. In this case, you can perform a Warm Boot,
which reinitializes the device without affecting the contents stored in
virtual memory.
To perform a warm boot do the following:
1. Tap
Start Programs Tools Warm Boot.
The
Warm Boot
confirmation window displays (Figure 2-9 on page 2-13).
NOTE
Screen captures stored in folders other than the
System CF folder will be lost if you remove power
from the unit.