33
7. BASIC OPERATION
X
PROCEDURE Manually calibrating the compass
1. Press the POWER button
while pressing
the FAR button
with the power switched
OFF. An audio tone sounds and the RC-
Controller is switched ON in calibration mode.
●
FAR
and
●
SEARCH
are Lit.
2. Hold the RC-Controller vertical and press the
SEARCH button
.
●
FAR
flashes red and calibration starts.
3. Without moving the position of the RC-
Controller, rotate it 1.5 to 2 times in a
horizontal direction.
G
Rotate 1.5 to 2 times in approximately 10
seconds.
4. After rotating, continue to hold the RC-
Controller vertical and press the SEARCH
button .
●
SEARCH
turns Off.
5. Hold the RC-Controller horizontal and press
the SEARCH button
.
●
FAR
Flashes.
1m or above
