23
6. SETTINGS FOR THE SRX/NET
and reticle after Auto Pointing completed changes as shown below depending on the Accu.
search. setting.
"Fine":
± 5" (approx.)
"Rapid":
± 30" to ± 10’ (depending on distance)
2. Set "Srch. method" to "R.C." in order to start
Turning operation in response to a Turning
command issued from the RC-Controller.
Set to "G.S." to search for the target in the area
specified in the Search area tab.
3. When necessary, set the JOG dial turning speed
for vertical and horizontal rotation of the
telescope. The "Shift" point signifies the dial
turning speed at which telescope rotation
switches from the Lo speed setting to the Hi
speed setting.The higher the "Shift" point setting,
the faster the jog dial turning speed needed to
activate the "Hi" speed setting.
Settings and Options
(1) Lo
1 to 4 (steps. 4 is fastest)
(2)
Hi
1 to 7 (steps. 7 is fastest)
(3)
Shift point
1 to 6 (steps)
Press
[INIT]
to return JOG Setting tab settings
only to their factory settings.
4. Press
[OK]
.
