manualshive.com logo in svg

Sokkia DX Series, Operator'S Manual, Page: 2 / 188

Share
Download
Sokkia DX Series Operator'S Manual Download Page 2

i

H

OW

 

TO

 

READ

 

THIS

 

MANUAL

Thank you for selecting the DX-201AC/202AC/203AC/205AC.

• Please read this Operator’s manual carefully, before using this product.
• DX has a function to output data to a connected host computer. Command operations from a host 

computer can also be performed. For details, refer to "Communication manual" and ask your local 
dealer.

• The specifications and general appearance of the instrument are subject to change without prior 

notice and without obligation by TOPCON CORPORATION and may differ from those appearing in 
this manual.

• The content of this manual is subject to change without notice.
• Some of the diagrams shown in this manual may be simplified for easier understanding.
• This manual is protected by copyright and all rights are reserved by TOPCON CORPORATION.
• Except as permitted by Copyright law, this manual may not be copied, and no part of this manual 

may be reproduced in any form or by any means. 

• This manual may not be modified, adapted or otherwise used for the production of derivative works.

Symbols

The following conventions are used in this manual.

G

: Indicates precautions and important items which should be read before 

operations.

C

: Indicates the chapter title to refer to for additional information.

$

: Indicates supplementary explanation.

&

: Indicates an explanation for a particular term or operation.

[Softkey]

 etc.

: Indicates softkeys on the display and window dialog buttons.

{Key}

 etc.

: Indicates keys on the operation panel.

<Screen title> etc. : Indicates screen titles.

Auto Tracking and Turning using the Remote Controller system (option)

• Auto Tracking and Turning using the Remote Controller and RC Handle are optional functions.
• Auto Tracking function becomes effective as a result of 100/200AC+ EDITION Upgrade Kit.

C

How to upgrade the instrument: "100/200AC+ EDITION UPGRADE Kit UPGRADE MANUAL"

• To use Turning function using the Remote Controller system, change the standard Handle to the RC 

Handle (optional accessory). Setting change is also required.

C

Changing the handle: "4.1 Parts of the Instrument 

L

Detaching/attaching the Handle",

RC Handle setting: "20.2 Instrument Configuration",
RC Handle: "25. OPPTIONAL ACCESSORIES"

Summary of Contents for DX Series





























































































































































































Reviews:

No comments