AI3050S Sargas AEI Reader
7
March 25, 2018
3. Sargas Configuration Software
To change the IP address of the Sargas reader, use your web browser to make a network
connection with the Sargas reader. If you know the Sargas reader’s current IP address, you
can enter it directly. If not enter the Sargas reader’s URL. The URL of the reader is printed
on the side of the module. In
Figure 5
the Sargas’ URL is Sargas-45b229. If the Sargas
Reader is directly connected to a PC, add ".Iocal" to the URL. When prompted, enter "web"
as the username and "radio" as the password.
Figure 5 - Sargas URL
After a few moments, you will be connected to the Sargas status screen (see
Figure 6
).
Figure 6 - Sargas Status Display
To change the network settings click on “Settings” and then on “Ethernet Interface”, which will
cause the screen in
Figure 7
to appear.
URL
