Chapter 1 - Introduction
Copyright 2017 Softing Industrial Automation GmbH
5
1
Introduction
1.1
About TH LINK
TH LINK provides a secure access to the fieldbus network and forms the basis for the Softing
product TH SCOPE.
Intended use: The TH LINK is designed to be used as a secure access point to Industrial Ethernet
networks. Any other use is deemed non-intended use.
1.2
Before you connect TH LINK
Strictly observe the following safety instructions before connecting the TH LINK:
Note
Small objects or liquids must not enter the case of the TH LINK (e.g. through the ventilation
slots). This may damage the device. Never cover the ventilation slots on the device.
Note
Never open the case of the TH LINK or carry out any mechanical modifications on the
device. This may lead to damages on the device as well as to loss of warranty.
EMC note
The TH LINK contains electronic components sensitive to electrostatic discharges. Damages
due to electrostatic discharge can lead to premature failure of components or intermittent
faults at a later stage. Before installing the TH LINK, divert the electrostatic discharge away
from your body and the tools used.
The TH LINK may only be installed or uninstalled by qualified, trained electrical engineering
personnel. When installing the TH LINK, observe the regulations for handling electric components in
accordance with VDE 0100. In addition, you must also observe the valid safety and accident
prevention regulations (UVV) when operating the device within the jurisdiction of the Federal
Republic of Germany.
High temperature differences between the storage site and installation site can result in
condensation within the case, which may cause the TH LINK to become damaged. In case of high
temperature differences, wait at least three hours before operating the device.
WEEE
Electrical and electronic equipment must be disposed of separately from normal waste
at the end of its operational lifetime.
Please dispose of this product according to the respective national regulations or
contractual agreements. If there are any further questions concerning the disposal of
this product, please contact Softing Industrial Automation.
Summary of Contents for TH LINK
Page 4: ......
