itnetworks.softing.com/XG
11
Tap on the respective field to enter the corresponding value.
Figure 5 – Interface selection
The screen also offers the choice of interface used for the active tests:
• RJ45 port for copper
– Auto-negotiation or fixed speed
• “1GbE” bay for fiber optic testing at 1 Gigabit Ethernet via optional SFP module
• “10GbE” bay for fiber optic testing at 10 Gigabit Ethernet via optional
SFP+ module (after this selection, the device boots into a special mode)
• “WiFi”, connection to the network is established via WLAN. See next page
WiFi Scan for settings
This window provides additional device information for incorporation into an
active network:
• MAC address
• IPv6 link local address
S Y S T E M S E T T I N G S
