FG-200 HSE/FF Modbus - Qui ck Sta rtup Gui de
12
© Softing Industrial Automation GmbH
Mounting
1.
Hook the upper notch of the cut-out on the
back of the FG-200 into a 35 mm DIN rail.
2.
Press the FG-200 down towards the rail
until it slides into place over the lip of the
locking bar.
Note
Do not put stress on the device by bending or torsion.
Dismounting
1.
Slide a screwdriver diagonally under the
housing into the locking bar.
2.
Lever the screwdriver upwards, pull the
locking bar downwards - without tilting the
screwdriver - and move the gateway upwards
off the rail.
